This is placed on height of the flange of the cleaning and easy from an expert to check. The Aqua storage are generally fitted with a smooth tube heat exchangers for solar loading. The auxiliary heating is carried out through a heating boiler, for there is a connection point in the cleaning of flange. Optionally, you can integrate a second heat exchanger to the conventional auxiliary heating. The available storage volumes range from 200 to 1,000 litres. Up to 500 litres of storage volume, the Aqua is fixed foam in a 50 mm strong PU insulation. From 750 liters capacity, one protects removable 100 mm soft foam insulation with Skymantel against heat loss.
The solar circuit group directly to the store can be mounted up to a volume of 500 litres. Casa I, the combined storage tank for hot water and heating is designed for the supported solar hot water heating and heating support are the combined storage tank Casa I, which are available in volumes from 600 to 1.650 litres. The officers made of steel, external powder coated storage are each equipped with a heat exchanger from stainless steel corrugated pipe for hot water. Basically an intelligent temperature stratification is integrated. When using two smooth tube heat exchangers for solar entry and the reheating, the option of a reversing valve is in addition to take advantage of the heat exchanger in the heating of the solar entry. This increases the capacity to store the solar offer time of day.
In addition supports the temperature stratification, and briefly raised the hot water output. The combined storage tank with 70 mm thick PU hard foam trays are insulated to a volume of 1,000 litres. This corresponds to a soft foam insulation 120 mm equivalent. When the save up to 1,000 liters direct mounting of the designed module groups is possible again. Hot water storage Casa for high-end solar plants built as modular system the Casa heating water storage are very variable can be used: as a buffer memory without heat exchangers. with one or two smooth tube heat exchangers for the integration of solar collectors and other heat sources. Also here the of solar heat can be transferred via a switching valve two layers to the heating water. Hot water via a fresh water module mounted externally to the store in the module group is in contrast to the Casa I. A layer charging Lance, which ensures an optimal temperature stratification belongs to the standards of the heating reservoir. The hot water storage are also made of steel and powder-coated exterior. As the combined storage tank Casa I also the hot water storage is insulated to a nominal volume 1000 litres with PU hard foam trays.