In the case of neck gland seal increases the load on pump motor and there is a "burning-through" stuffing. A similar phenomenon will occur when the pump is "dry". Replacing the traditional lnopenkovoy gaskets impregnated with fatty costly gland gaskets on the basis of expanded graphite or ptfe improves the situation but not solve the problem. Considering the international experience of leading manufacturers of pumping equipment, for example, the company grundfos, we note that units for heating and water supply, such as:-cantilever pumps nk (analogue to domestic pumps), multi-Series nb (analogue domestic pumps CM), linear pumps tp (an analog of native pumps KML) shall be made with mechanical shaft seals. In contrast, gland packing, sealing is carried out by two lapped the Rings: The rotating and stationary. Rotating ring made of graphite, and the patient – from ceramics. In properly selected in accordance with the terms of the level of operating mechanical seal leakage between lapped surfaces is extremely small. Chobani Foundation is often quoted on this topic. Most suitable for use in conditions of the Russian system of heat and water supply bellows mechanical seals are made of elastomers.

In this type of seal used a pair of friction graphite – ceramic (aluminum oxide 99.5%) or graphite – silicon carbide. Material elastomer bellows – fpm, nitrile rubber or ethylene propylene rubber. Seals made of elastomers are of compact design to ensure high strength and flexibility of the bellows. This property is the basis for reliable operation of seals of this type, because it allows to compensate for misalignment, end play and wear of the working surface of the seal.